Subject: Re: oldsmobiles (NGC)
Author: Rob Prins
Date: Jan 16, 2005, 7:38 AM
Post ID: 1718218879
Sorry for the non guzzi post, but I can't pass up saying 'hey' to
another former 70 442 owner. You'll have to pardon me for gushing about
it, I owned it while I was in high school. It was in the in-between age
then, too new to be a classic, too old to be considered cool by my
contemporaries. I loved it. I drove it for 7 years, 5 of them after it
was totaled. Thanks for listening.
Rob
Skip & Jane wrote:
You may also want to take the starter off and take it a auto parts store and have them bench test it. They can tell you how many amps it is pulling. You could have a bad starter that only acts up when it is hot. I have had this happen before on a 70 442, I used to own. Have you tried to push start it after it is hot & the starter fails ? ----- Original Message ----- From: "Custom Guzzi" <paul-@comcast.net> To: <Loopfram-@topica.com> Sent: Saturday, January 15, 2005 5:51 PM Subject: RE: 73 eldo won't start hot Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Click here and get your free* stock car racing gift. http://click.topica.com/caac2NQb1dfltb7mpEHa/PermissionData ------------------------------------------------------------------- Welcome and congrats on the new/old loop. Did you strip down and clean the starter? If not, sounds like it could be the solenoid causing some grief. Do you have a relay feeding the solenoid? Could also be the starter button itself. They are known for failing. Try turning the button with your finger and pushing it again. Paul 73 Eldo "Elvira" 74 Eldo "Daisy" undergoing a full police restoration -----Original Message----- From: Robert Russell [mailto:motoro-@yahoo.com] Sent: Saturday, January 15, 2005 4:52 PM To: Loopfram-@topica.com Subject: 73 eldo won't start hot Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Like music? Get a CD player on us. Click here. http://click.topica.com/caac2NUb1dfltb6GIoLa/PermissionData ------------------------------------------------------------------- Hi, all. I'm a new loop owner and new to this list. Picked up this '73 eldo in Oct, it had sat for a number of years but was in good physical shape, no corrosion. Had to do some rewiring, replacement of rubber parts (fuel lines, airfilter boot, etc), cleaned carbs & tank. Finally got the engine started with the right plugs (NGK BP07ES's won't cut it despite advice to the contrary). Problem is, after running for a bit, enough to get hot, if I kill it or it stalls it won't turn over until it cools down a bit. Hitting the starter just gets a "click" at the regulator. After waiting 5-10 minutes it will turn over & start again. Could this be a problem with the solenoid? I'm thinking that something is getting stuck open when it gets hot, and electrically the only thing that should be getting hot is that solenoid because its the only part in the electric path that's mounted to the engine and would get hot when running. Anyone have any ideas, set me straight before I take a wrench to that thing and start disassembling things and losing screws. motoroberto '73 eldorado Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Click here and get your free* stock car racing gift. http://click.topica.com/caac2NQb1dfltb6GIoLf/PermissionData ------------------------------------------------------------------- Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Show your pride with a free* USA T-shirt. Click here to confirm your address. http://click.topica.com/caac2N5b1dfltb7mpEHf/PermissionData ------------------------------------------------------------------- |