Topica Loopframe_Guzzi Archive


Subject: RE: Fiberglass leg shield mounting???

Author: dave luby

Date: Jan 19, 2005, 7:06 PM

Post ID: 1718239317



Hacksaw, I have these shields on my Eldo. I put a couple of small U bolts
around the bars through the shields with large washers and nuts on the
inside.Not the cleanest setup but stays in place.You may want to call Eish
Enterprises,Joe use to sell these years ago,330 738-3944. Dave

 From: Hacksaw <hacksa-@hotmail.com>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: Fiberglass leg shield mounting???
Date: Tue, 18 Jan 2005 22:36:41 +0000

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Like music? Get a CD player on us. Click here.
http://click.topica.com/caac2NUb1dfltb2HKn1a/PermissionData
-------------------------------------------------------------------

Greetings,
I have a set of fiberglass leg shields like the set shown here
http://www.classicguzzi.com/pictures/blueeldodresser2.jpg

I'm wanting to know if someone is intimately familiar with their
mounting and could share the arrangement with me?

Thanks,
Hacksaw

non � rumore che sia musica

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Show your pride with a free* USA T-shirt. Click here to confirm
your address.
http://click.topica.com/caac48Tb1dfltb2HKn1f/PermissionData
-------------------------------------------------------------------

Entire thread: