Topica Loopframe_Guzzi Archive


Subject: RE: V700 Engine Issue - Thanks

Author: Paul P. Linn

Date: Jan 22, 2005, 12:18 PM

Post ID: 1718255418



Looks good John. I just love the fenders on the Indians. Always wanted to
graft some to a Loop.

Paul
73 Eldo "Elvira" 949 conversion
74 Eldo "Daisy" undergoing a full police restoration


-----Original Message-----
From: John Prusnek [mailto:spaj-@raex.com]
Sent: Saturday, January 22, 2005 2:43 PM
To: Loopfram-@topica.com
Subject: V700 Engine Issue - Thanks


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac48Qb1dfltb6GIoLa/PermissionData
-------------------------------------------------------------------

Tom:
The newest project is a '47 Indian Chief, I''ve got it down to the
painted frame, front forks and shocks are rebuilt, I'm getting ready to
go .030 over on the cylinders, the guy who built it up before me built
it to 80" (stock was 76") and it required some machining of the pistons
to fit, it'll be kind of a hot rod.
I just finished putting some photos of it on one of my albums, you can
see them here
http://myweb.core.com/photos/spajohn@raex.com/1947ChiefProject
for the rest of the stable (and some Guzzi content) you could take a
look here
http://myweb.core.com/photos/spajohn@raex.com/

John Prusnek

 John

What is in your stable now? Any new projects?

Tom in Boston
----- Original Message -----
From: "John Prusnek" <spaj-@raex.com>
To: <Loopfram-@topica.com>
Sent: Thursday, January 20, 2005 8:12 PM
Subject: V700 Engine Issue - Thanks


Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac2NQb1dfltb7hDhIa/PermissionData
-------------------------------------------------------------------

John:
I hadn't weighed in on this issue yet, but this reminds me of when
my wife and I rode down to Mid-Ohio several years back, she was on the
'71 Ambo when it suddenly lost power while cruising around 70mph. She
nursed it to the next rest stop where I found that one piston had shut
down. After determining that it was still getting gas and spark and that
there was nothing else to do, we fired it up and she limped it about 40
miles to Mid-Ohio on one cylinder.
The autopsy revealed that for some reason the valve kissed the top
of the piston and bent it enough to hold it open.
After mentioning the cost of a new valve to my machinist brother, he
insisted that he bend it back. 5000 miles later and that valve is still
in there.

John Prusnek

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac2NQb1dfltb6GIoLf/PermissionData
-------------------------------------------------------------------

Entire thread: