Subject: Re: Swingarm removal
Author: GUZZI-@aol.com
Date: Feb 4, 2005, 8:55 PM
Post ID: 1718337732
--part1_1df.349bef3e.2f35abda_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
Takes a special tool or take two allen wrenches,or back side of drill bits
that fit in little holes.back off nut,put bits,or allen wrenches in holes,put
Big screw driver between and turn lefty loosey,or righty tighty,if they are
really tight,squirt with wd 40 and give them three hard smacks with a good heavy
hammer on there faces.lefty loosey out.righty in.WORSE case,put a vice gripes
on them,and call me for free used ones,Mark
--part1_1df.349bef3e.2f35abda_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 8bit
<HTML><FONT FACE=arial,helvetica><HTML><FONT SIZE=2 PTSIZE=10>Takes a special tool or take two allen wrenches,or back side of drill bits that fit in little holes.back off nut,put bits,or allen wrenches in holes,put Big screw driver between and turn lefty loosey,or righty tighty,if they are really tight,squirt with wd 40 and give them three hard smacks with a good heavy hammer on there faces.lefty loosey out.righty in.WORSE case,put a vice gripes on them,and call me for free used ones,Mark</FONT></HTML>
--part1_1df.349bef3e.2f35abda_boundary--