Topica Loopframe_Guzzi Archive


Subject: eldo dash wiring help needed- idiot lights?

Author: brian c

Date: Feb 8, 2005, 8:36 PM

Post ID: 1718358114



I don't know if I can link photos here, but I am going to try- at any
rate, I am re-wiring this bike, a 73 eldo with dual dash, and I have not
done one of these in a while and i can't figure it out from my wiring
diagram- I have 4 idiot lights, two of them on the left side have two
spade connectors each and the other 2 have a single female connector
each-
2 spade connectors:

Neutral - has green wire from neutral switch on one and a short wire
going to the oil pressure spade connector on the other.

Oil Pressure- has grey wire from oil pressure sending unit on one and
the shore wire to neutral indicator on the other

Female connectors:

Generator- has on red wire coming from the generator

lights indicator- has one yellow/black wire from light circuit

now, from my wiring diagram for this bike it looks like there should be
a white/black wire coming from the fuse block to the generator light as
well- is this correct, and if so, how am I sopposed to connect it? It
also loks liek there should be a wire connecting the generator light to
the oil pressure light- if so, how do I connect it? just splice it in?



http://pg.photos.yahoo.com/ph/wfrwasher/detail?.dir=/f924&.dnm=fba9.jpg&.src=ph

http://pg.photos.yahoo.com/ph/wfrwasher/detail?.dir=/f924&.dnm=784e.jpg&.src=ph



Berkeley, CA
'73 Eldo
74 eldo
73 v7sport

Entire thread: