Subject: Re: was Dunstall's now brakes
Author: Tom Halchuk
Date: Feb 10, 2005, 7:44 AM
Post ID: 1718367581
I measured the original spacer. I believe the spacers need to match. The
original spacer is 39.5 MM wide.
Tom
----- Original Message -----
From: "Karl Kologiski" <kkolo-@earthlink.net>
To: <Loopfram-@topica.com>
Sent: Thursday, February 10, 2005 6:51 AM
Subject: Re: was Dunstall's now brakes
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
http://click.topica.com/caac8usb1dfltb7hDhIa/ProductTestPanel
-------------------------------------------------------------------
Since you are doing the duel disc thing, do you know what disc spacer you
need to use to add a 2nd disc to a eldo or what the thickness is. I have a
box of different spacers and am having trouble finding the right one
thx
----- Original Message -----
From: "Gordon Kline" <eds-h-@eishome.com>
To: <Loopfram-@topica.com>
Sent: Thursday, February 10, 2005 12:07 AM
Subject: Re: Dunstall's
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
We have the 42 Inch Plasma TV you've been looking for!! Sony or
Panasonic 42 Inch Plasma Wide Screen TV's. Put one up on your
wall today! Click Below
http://click.topica.com/caac8uBb1dfltb7mpEHa/ExclusiveRewards
-------------------------------------------------------------------
It's gonna be somewhat personalized, but is mostly Guzzi parts, and will
have a stock appearing black paint job, so it's nothing that will stand out
in a crowd. I've been collecting some choice eldo parts for several years,
I now have what I need to make up a nice one, so I figure it's time. It's
gonna be double disks up front, with a cush drive 850T rear drum setup in
back. Gonna use the black and white 850GT California seat with the chrome
rail around the back, and the proper chrome rack behind it. Gonna use the
V700/Amb single instrument console with a Convert speedo, need to hide a
couple LED idiot lights somewhere off to the side. It's gonna have the big
handlebars and floorboards, and the big side stand. Gonna use Greg Fields'
alternator conversion rather than scrounge for a decent generator, bracket,
and regulator. Have a set of squarish unknown bags at the painter now, but
"bought it now" a set of Bates bags that I think I'll end up using because I
think I'll like them better, if they ever show up on my doorstep. Gonna use
the repro Guzzi police/utility fairing, gonna have to make up brackets to
mount it. All in all it should be Deluxe with a capital D. Ebay has been
good to me. I just stuck the motor and trans into the freshly powdercoated
frame tonight. Only scratched it a little....
Gordon
----- Original Message -----
From: "Custom Guzzi" <paul-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Wednesday, February 09, 2005 10:31 PM
Subject: RE: Dunstall's
You shop guys are all the same. :) It will probably show up tomorrow anyway.
Just been so anxious to get Elvira's motor back together and into the frame.
Been keeping myself busy bead blasting and painting small parts here and
there. Weather permitting, might work on my tank some more this weekend. So
you doing the Eldo stock or personalizing it a little?
Paul
73 Eldo "Elvira" 949 conversion
74 Eldo "Daisy" undergoing a full police restoration
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the PlayStation2 and Game Cube for Free! Click here to
find out how.
http://click.topica.com/caac8utb1dfltb7mpEHf/ConsumerResearch
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
http://click.topica.com/caac8uab1dfltb7hDhIf/PermissionData
-------------------------------------------------------------------