Subject: RE: Ignition Failure
Author: Robert Hawkes
Date: Apr 2, 2005, 3:21 AM
Post ID: 1718636582
Dennis, I feel your pain and this is just an early morning guess. How are
your fuses? Also, your regulator working OK? Also, I have heard of
condensers going fast but looks like you already replaced that. By the way,
new condensers can be bad, out of the box. Also, coils don't go bad quickly
but how about swapping a coil or just buying a new one? Or how about just
replacing just the one coil wire, since both plugs are not sparking I am
thinking something before the distributor, coil area. Just some ideas.
Check more stuff and get back to us, we'll figure it out. Bob hawkes
-----Original Message-----
From: Dennis Jones [mailto:dbjo-@compudok.com]
Sent: Friday, April 01, 2005 6:20 PM
To: Loopfram-@topica.com
Subject: Ignition Failure
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Want a laptop? Get an Apple iBook for free!
http://click.topica.com/caadlVBb1dfltb7ukc8a/AmazingComputer
-------------------------------------------------------------------
I suited up to go for a ride on a 70 degree day yesterday, would have been
my first ride in a while, and the Eldo wouldn't start. Dash lights and
headlight was fine, starter cranked strongly, but it wouldn't start. Pulled
a plug, cranked the motor, no spark. Tried the other side, no spark.
Checked all my battery connections. All okay. Checked my points, my
distributor, everything was kosher. Replaced the condenser as a precaution.
After every operation, I tried the bike and no spark. Did all the routine
checks of cleaning the points, checking points gap, replacing plugs with
new, etc. Nada.
Aside from the wire to the starter on the positive battery terminal, there
is a connector on the positive terminal that is attached to two red (I
think) wires which disappear into the harness. Is one or both the power to
the coils? Aside from replacing the connector on those wires this winter
(it was so corroded that it was disintegrating) with a good new heavy duty
soldered connector, I've done nothing to the bike since my last ride in late
fall. I'm clueless.
Dennis
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Help us support US Troops - Just Register Here.
http://click.topica.com/caadlVxb1dfltb7ukc8f/PermissionData
-------------------------------------------------------------------