Subject: Re: Oily clutch plates
Author: andy hill
Date: May 18, 2005, 3:21 PM
Post ID: 1718887969
Ted-
i use a butane torch, and flick the flame [hmmm-that sounds weird]
around on the discs. the oil will rise to the surface, and ya wipe it
off with a rag. keep doing this 'till there ain't anymore oil. don't
leave the flame in one place very long, tho.
andy
Ted Ward wrote:
| Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Erase wrinkles without painful injections with Nexiderm SP. Nexiderm SP is clinically proven to reduce wrinkles by 68% Click here to get your 30-day free supply. http://click.topica.com/caadvf5b1dfltb2Paqpa/Nexiderm ------------------------------------------------------------------- I mentioned before that my transmission seal went out and my bike was leaking a lot of gear oil. One effect of that is that my clutch plates were soaked in oil (though they surprisingly didn't slip on the 70 mph 100 mile ride home) Is this a long term problem or can I just use mineral spirits to clean them off and stick them back in? Ted Ward Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Take movies and games anywhere with a Free Playstation Portable! http://click.topica.com/caadwPbb1dfltb2Paqpf/ProductTestPanel ------------------------------------------------------------------- |