Subject: RE: Idle Speed
Author: AJ Huff
Date: Jun 3, 2005, 7:18 PM
Post ID: 1718970708
Wow, that made a difference. THANKS! I measured 0.28mm intake and 0.30mm
exhaust. So thatsounds like too loose rather than too tight, on this
side at least.
Just follow those tappet adjustment instructions to tighten up?
Thanks,
-AJ
John Ulrich wrote:
AJ Huff wrote: |
*** Either too tight or you might be on the wrong stroke. Mark the lower fan belt pulley across from the arrow (2:00 position) Now rotate the pully clockwise to that point again and see if the valves are still tight. You want to be in the compression stroke where both valves are closed (you will be able to wiggle the rocker arms). Later, JU |
AJ Huff
'71 Ambassador
Three Rivers, MI
MGNOC# 19917