Subject: RE: Keys, rust removal
Author: Greg Bender
Date: Jun 8, 2005, 5:33 AM
Post ID: 1718989539
Hi Kevin,
Is this the site you were referring to? (found it in the archives)
http://www.softcom.net/users/w6rec/duane/bmw/keys.htm
Kevin Graf wrote:
I had a link a long time ago, well a year or two, that had a diagram of a Nieman key. This diagram showed what the different cuts meant in the key. Supposedly, you were able to take this to a locksmith and with these "instructions" anyone could cut a key with the proper blank (which has been cover numerous times)Even you with a file... I DO HAVE this somewhere, and have looked this morn with no luck. I believe it was off the Airhead BMW site since they use the same keys. I will continue to try to find this. It was just too valuable of info to toss. Does this ring a bell to any of the dinosaurs on this list? Kev -----Original Message----- From: John Chicoine [mailto:jchic-@mestek.com] Sent: Wednesday, June 08, 2005 8:16 AM To: Loopfram-@topica.com Subject: Re: Keys, rust removal Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Get $1,000 to spend on groceries. any way you please. Click here! http://click.topica.com/caadAcAb1dfltb63b4qa/GrocerySpree ------------------------------------------------------------------- Charlie: I was very impressed with the tank kit I got from POR 15. John C. ----- Original Message ----- From: "Charlie Mullendore" <c.d.mul-@att.net> To: <Loopfram-@topica.com> Sent: Tuesday, June 07, 2005 6:36 PM Subject: Keys, rust removal Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Get a Free T-Mobile Sidekick II plus $500 towards service! Click here. http://click.topica.com/caadAcqb1dfltbN7eKTa/ProductTestPanel ------------------------------------------------------------------- Not going to start on the '70 Ambo project for a few weeks yet, but wanted to "get my ducks in row" for it. So, a few questions: 1. Need keys for the ignition switch. Have some key blanks I bought at VMD last year but have yet to find a good local locksmith to cut them. Did I remember a post about "Keymen" (think that's their name) cutting keys for locks with none? Any other sources welcome also. Could also just use the new switch I didn't use on the '69, I guess. But would like to use as many of the parts that came with the bike as possible. 2. Have a little light rust inside the gas tank and on the frame in several areas. What to use (won't be repainting the frame)? Just want to remove (or convert) the rust and prevent it's return. Naval jelly? Or? Anyone used the product Rustol from Sudco in a tank? Any other suggestions welcome. Thanks y'all, Charlie http://www.loopframeguzzi.com/ Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Need a Laptop? Get a Sony Vaio Laptop Free! http://click.topica.com/caadAcrb1dfltbN7eKTf/ProductTestPanel ------------------------------------------------------------------- Your free subscription is supported by today's sponsor: ------------------------------------------------------------------- Need a Laptop? Get a Sony Vaio Laptop Free! http://click.topica.com/caadAcrb1dfltb63b4qf/ProductTestPanel ------------------------------------------------------------------- |
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Florida MGNOC website
http://www.thisoldtractor.com/fl_mgnoc
Minnesota MGNOC website
http://www.thisoldtractor.com/mn_mgnoc