Subject: RE: swingarm spindle bolts
Author: Paul P. Linn
Date: Jun 13, 2005, 1:13 PM
Post ID: 1719013930
Matt,
Put down the beer and step away from the bike. Check the threads on the
pivot pin.
Paul
-----Original Message-----
From: Matthew Moore [mailto:moore-@cablespeed.com]
Sent: Monday, June 13, 2005 1:07 PM
To: Guzzi Looplist
Subject: swingarm spindle bolts
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
http://click.topica.com/caadzTWb1dfltb6GIoLb/ProductTestPanel
-------------------------------------------------------------------
Anybody have trouble getting the swingarm spindle pins to start straight?
I'm having trouble getting the LH pin to start and go in straight. I
borrowed the tap from Greg Bender (thanks again Greg) and chased the threads
because I thought that maybe powder coating on the threads may have
contributed.
But I'm still having trouble with that side.
Anybody have tips on getting things to line up? I am putting it back on with
the wheel still attached (left it on when I took it apart to pull the
trans.)
Matt
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Take movies and games anywhere with a Free Playstation Portable!
http://click.topica.com/caadz4eb1dfltb6GIoLg/ProductTestPanel
-------------------------------------------------------------------