Subject: RE: Electrical questions
Author: Greg Bender
Date: Jul 20, 2005, 4:45 AM
Post ID: 1719180251
Hi Ted,
Although our headlight shells are deep, it is possible to get a
headlight that will not fit correctly in the space...essentially pushing
the fuses out - or at least dislodging them a bit when you ride. So, you
might just want to double check to see if that is possible with your
headlight.
I think this problem is most common with the halogen headlight shells.
For example, MG Cycle sells two versions - the Bosch will fit the
Ambo/Eldo headlight shell while the other will not.
ju-@astrocomma.com wrote:
I took out all the fuses and coated each end with a dab of di-lectric grease. Same for all the bullet connectors. But I got the same result a few miles into a ride stopped running. Removing the headlight "seemed" to fix it, but maybe just a coincidence. Using a standard sealed beam headlight and connector so don't *think* its too large. I need to put a tiny person in there while I ride who can observe things. --- guzzi-@aol.com wrote:
Ted Ward |
Regards,
Greg Bender
1971 Ambassador
2000 Quota
http://www.thisoldtractor.com/gtbender
Florida MGNOC website
http://www.thisoldtractor.com/fl_mgnoc
Minnesota MGNOC website
http://www.thisoldtractor.com/mn_mgnoc