Topica Loopframe_Guzzi Archive


Subject: Re: Speedo Disassembly

Author: Matt Moore

Date: Aug 7, 2005, 6:46 PM

Post ID: 1719263579



Steve,
you have to carefully pry away the backside (as seen from the front looking
at the speedo face) of the bezel/chrome ring around the glass.
If you do it right, you should be able to remove the glass from the speedo,
then take off the two (I think) screws on the back and the whole assembly
will come out of the can.

you might be better off sending it to a pro, tho because the small parts
might be hard to work on.

Matt

Entire thread: