O-rings for the Suzuki DR650

High quality O-rings at discount prices.

O-rings for the 1990 - 2023 Suzuki DR650 motorcycle

O-rings are also available for the Suzuki DR350

I tired of purchasing multiple USD $2.00 and USD $4.00 OEM Suzuki O-rings for simple oil filter changes or to reseal the valve inspection covers, etc. So, I set out to document and then source appropriately sized O-rings. The result is the list of O-rings shown below. All are fresh, good quality O-rings made from Buna-N or Viton material and fit very well. Viton is more resistant to deterioration when in contact with modern fuels.

Pricing: O-rings are priced individually or as a kit. See the table below.

Shipping: All shipping is via USPS First Class Mail. I am usually able to ship the same day an order is placed.

USA postage and handling charges are based on the amount of your purchase and are calculated as follows:

Order $0.01 to $4.99: $6.00
Order $5.00 to $17.25: $2.00
Order $17.26 to $99.99: $4.00
Order $100.00 or more: $10.60

International postage and handling charges are based on the amount of your purchase and are calculated as follows:

Order $0.01 to $4.99: $10.00
Order $5.00 to $17.25: $4.00
Order $17.26 to $99.99: $10.00
Order $100.00 or more: $41.25

Minimum order amount: No minimum order amount. But, please see postage and handling charges above. I am effectively imposing a minimum order amount of USD $5.00.

O-ring kit to fit the Suzuki DR650

Part Number	Description	Photo	Price
OR-KIT-DR650	O-ring kit to fit the Suzuki DR650 (all 1996 - 2023 model years) Quick reference code: OR-KIT-DR650 The OR-KIT-DR650 provides standard Buna-N O-rings for all applications that are in contact with oil; Viton O-rings are provided all applications that are in contact with fuel. O-ring kit contains the following nineteen (21) O-rings: OR-1: Four (4) Buna-N O-rings to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008) OR-2: One (1) Buna-N O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003) OR-4: One (1) Buna-N O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007) OR-5: One (1) Buna-N O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001) OR-8: One (1) Buna-N O-ring to seal the large plug to the magneto cover (SPN# 09280-33004) OR-9: One (1) Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Viton is more resistant to deterioration when in contact with modern fuels. OR-10: One (1) larger Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Viton is more resistant to deterioration when in contact with modern fuels. OR-13: One (1) smaller Viton O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Viton is more resistant to deterioration when in contact with modern fuels. OR-16: One (1) Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Viton is more resistant to deterioration when in contact with modern fuels. OR-17: One (1) Buna-N O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002) OR-18: Two (2) Buna-N O-rings to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01) OR-19: One (1) Buna-N O-ring to seal the starter motor to the engine case (SPN# 31156-48B00) OR-20: Four (4) Buna-N O-rings to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012) OR-21: One (1) Viton O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310). Viton is more resistant to deterioration when in contact with modern fuels.	O-ring kit to fit the Suzuki DR650 Photo courtesy of Gregory Bender. O-ring kit to fit the Suzuki DR650 Photo courtesy of Gregory Bender. Direct link to image	USD $17.25 Compare to a typical dealer price of USD $76.18 for all O-rings combined. Shipping costs

Part Number

Description

Photo

Price

OR-KIT-DR650

O-ring kit to fit the Suzuki DR650 (all 1996 - 2023 model years)

Quick reference code: OR-KIT-DR650

The OR-KIT-DR650 provides standard Buna-N O-rings for all applications that are in contact with oil; Viton O-rings are provided all applications that are in contact with fuel.

O-ring kit contains the following nineteen (21) O-rings:

OR-1: Four (4) Buna-N O-rings to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008)
OR-2: One (1) Buna-N O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003)
OR-4: One (1) Buna-N O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007)
OR-5: One (1) Buna-N O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001)
OR-8: One (1) Buna-N O-ring to seal the large plug to the magneto cover (SPN# 09280-33004)
OR-9: One (1) Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900).
Viton is more resistant to deterioration when in contact with modern fuels.
OR-10: One (1) larger Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00).
Viton is more resistant to deterioration when in contact with modern fuels.
OR-13: One (1) smaller Viton O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710).
Viton is more resistant to deterioration when in contact with modern fuels.
OR-16: One (1) Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV).
Viton is more resistant to deterioration when in contact with modern fuels.
OR-17: One (1) Buna-N O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002)
OR-18: Two (2) Buna-N O-rings to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01)
OR-19: One (1) Buna-N O-ring to seal the starter motor to the engine case (SPN# 31156-48B00)
OR-20: Four (4) Buna-N O-rings to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012)
OR-21: One (1) Viton O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310).
Viton is more resistant to deterioration when in contact with modern fuels.

O-ring kit to fit the Suzuki DR650
Photo courtesy of Gregory Bender.
O-ring kit to fit the Suzuki DR650
Photo courtesy of Gregory Bender.
Direct link to image

USD $17.25

Compare to a typical dealer price of USD $76.18 for all O-rings combined.

Shipping costs

Individual O-rings to fit the Suzuki DR650

Part Number	Description	Photo	Price
SPN# 09280-12008	O-ring to seal the oil cooler lines to the engine and oil cooler Quick reference code: OR-1 O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008). Fits 1996 - 2000 model years. Four are required. Sold each. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008) Photo courtesy of Gregory Bender. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008) Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12008). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.50 Compare to a typical dealer price of USD $2.46 each. Shipping costs
SPN# 09280-17003	O-ring to seal the oil fill cap to the clutch cover Quick reference code: OR-2 O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Photo courtesy of Gregory Bender. O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the oil fill cap to the clutch cover (SPN# 09280-17003). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.75 Compare to a typical dealer price of USD $1.44 each. Shipping costs
SPN# 09280-16005	O-ring to seal the oil filter to the engine case Quick reference code: OR-4 O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Photo courtesy of Gregory Bender. O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the oil filter to the engine case (SPN# 09280-16005 or SPN# 09280-15007). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.50 Compare to a typical dealer price of USD $1.51 each. Shipping costs
SPN# 09280-72001	O-ring to seal the oil filter cover to the engine case Quick reference code: OR-5 O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Photo courtesy of Gregory Bender. O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the oil filter cover to the engine case (SPN# 09280-72001). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.75 Compare to a typical dealer price of USD $4.40 each. Shipping costs
SPN# 09280-33004	O-ring to seal the large plug to the magneto cover Quick reference code: OR-8 O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Photo courtesy of Gregory Bender. O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the large plug to the magneto cover (SPN# 09280-33004). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.50 Compare to a typical dealer price of USD $1.98 each. Shipping costs
SPN# 13295-29900-BUNA	Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body Quick reference code: OR-9 O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Buna-N is less expensive than Viton material, but Buna-N does not hold up as well when in contact with modern fuels. One is required per carburetor. Fits 1994 - 2023 model years. One is required. Sold each. Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Photo courtesy of Gregory Bender. Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Photo courtesy of Gregory Bender. Direct link to image	Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Sold each. Photo courtesy of Gregory Bender. Buna-N O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Sold each. Photo courtesy of Gregory Bender. Direct link to image	Buna-N USD $0.50 Compare to a typical dealer price of USD $4.02 each. Shipping costs
SPN# 13295-29900-VITON	Viton O-ring to seal the pilot air/fuel screw to the carburetor body Quick reference code: OR-9-VITON O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). The cost for Viton is higher, but Viton is more resistant to deterioration than Buna-N when in contact with modern fuels. One is required per carburetor. Fits 1994 - 2023 model years. One is required. Sold each. Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Photo courtesy of Gregory Bender. Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the pilot air/fuel screw to the carburetor body (SPN# 13295-29900). Sold each. Photo courtesy of Gregory Bender. Direct link to image	Viton USD $1.50 Compare to a typical dealer price of USD $4.02 each. Shipping costs
SPN# 13374-35C00	Lager O-ring to seal the float to the carburetor body Quick reference code: OR-10-VITON Lager O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. One is required per carburetor. Fits 1990 - 2023 model years. One is required. Sold each. Other applications: This also fits the float valve seat used on Mikuni BSR36 carburetors as fit to the Suzuki GSF 1200 Bandit, GSF 1200S Bandit, and other models (Needle Valve Seat part numbers KV-10 or KV/10 or 002-709). Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Sold each. Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the float to the carburetor body (SPN# 13374-35C00). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $1.50 Compare to a typical dealer price of USD $5.43 each. Shipping costs
SPN# 13374-46710	Smaller O-ring to seal the float cage assembly to the carburetor body Quick reference code: OR-13-VITON Smaller O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Photo courtesy of Gregory Bender. O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the float cage assembly to the carburetor body (SPN# 13374-46710). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $1.50 Compare to a typical dealer price of USD $5.43 each. Shipping costs
THROTTLE-SLIDE-GUIDE-BUNA	Buna-N O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV) Quick reference code: OR-16 O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Buna-N is less expensive than Viton material, but Buna-N does not hold up as well when in contact with modern fuels. One is required. Sold each.	Buna-N O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Sold each. Photo courtesy of Gregory Bender. Buna-N O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Sold each. Photo courtesy of Gregory Bender. Direct link to image	Buna-N USD $0.50 Not available separately from Suzuki. Shipping costs
THROTTLE-SLIDE-GUIDE-VITON	Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV) Quick reference code: OR-16-VITON O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). The cost for Viton is higher, but Viton is more resistant to deterioration than Buna-N when in contact with modern fuels. One is required. Sold each.	Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the throttle slide guide to the carburetor body on BST carburetors (constant velocity or CV). Sold each. Photo courtesy of Gregory Bender. Direct link to image	Viton USD $1.50 Not available separately from Suzuki. Shipping costs
SPN# 09280-46002	O-ring to seal the carburetor intake manifold to the cylinder head Quick reference code: OR-17 O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Fits 1990 - 2023 model years. One is required. Sold each. O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Photo courtesy of Gregory Bender. O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the carburetor intake manifold to the cylinder head (SPN# 09280-46002). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.50 Compare to a typical dealer price of USD $9.16 each. Shipping costs
SPN# 11177-44B01	O-ring to seal the valve inspection covers to the cylinder head Quick reference code: OR-18 O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Fits 1996 - 2023 model years. Two are required. Sold each. O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Photo courtesy of Gregory Bender. O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the valve inspection covers to the cylinder head (SPN# 11177-44B01). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $1.00 Compare to a typical dealer price of USD $4.68 each. Shipping costs
SPN# 31156-48B00	O-ring to seal the starter motor to the engine case Quick reference code: OR-19 O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Fits 1996 - 2023 model years. One is required. Sold each. O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Photo courtesy of Gregory Bender. O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the starter motor to the engine case (SPN# 31156-48B00). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.75 Compare to a typical dealer price of USD $9.23 each. Shipping costs
SPN# 09280-12012	O-ring to seal the oil cooler lines to the engine and oil cooler Quick reference code: OR-20 O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Fits 2001 - 2023 model years. Four are required. Sold each. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Photo courtesy of Gregory Bender. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Photo courtesy of Gregory Bender. Direct link to image	O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Sold each. Photo courtesy of Gregory Bender. O-ring to seal the oil cooler lines to the engine and oil cooler (SPN# 09280-12012). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $0.50 Compare to a typical dealer price of USD $4.13 each. Shipping costs
SPN# 13249-41310	O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310) Quick reference code: OR-21-VITON O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310). Available in Viton material only. Viton is more resistant to deterioration when in contact with modern fuels. One is required per carburetor. Fits 1990 - 1993 model years. One is required. Sold each. O-ring to seal the carburetor drain plug to the carburetor (SPN# 09280-12012). Photo courtesy of Gregory Bender. O-ring to seal the carburetor drain plug to the carburetor (SPN# 09280-12012). Photo courtesy of Gregory Bender. Direct link to image	Viton O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310). Sold each. Photo courtesy of Gregory Bender. Viton O-ring to seal the carburetor drain plug to the carburetor (SPN# 13249-41310). Sold each. Photo courtesy of Gregory Bender. Direct link to image	USD $1.50 Compare to a typical dealer price of USD $4.08 each. Shipping costs