Topica Loopframe_Guzzi Archive


Subject: RE: Several Annoying Questions...

Author: Kevin Graf

Date: Jun 21, 2001, 11:19 AM

Post ID: 1707208458


Barry,
I would check the compression. Also check to make sure your not leaking oil
from the upper end oil tubes.

As for the rr wheel, have you installed new brakes? Sometimes the shoes have
to be sanded down to size.
Kev

-----Original Message-----
From: Barry Dikeman [mailto:bar-@matiacontractors.com]
Sent: Thursday, June 21, 2001 1:51 PM
To: Loopfram-@topica.com
Subject: Several Annoying Questions...


============================================================
Feel the rush of discovery as you take an intense adventure
into the natural world. See Journey Into Amazing Caves, a large-
format film only at Chicago's Museum of Science and Industry.
http://click.topica.com/caaact8b1dfltb2D1Vxa/Museum
============================================================

I finally got around to swapping out my bad shift shaft with the new
part... easy repair and well... I can shift now!

Anyhow, while I was making the repair, I noticed a couple of things:
1. My left cylinder appears to be slightly weeping oil just below the
exhaust header nut. The oil (very very slight amount) is running along
a cylinder fin towards the spark plug. As I was tracing (and cleaning)
its route... I decided to pull the plug. Looked pretty good... slight
oily residue though. What is this indicative of!??
2. While the bike was on the center stand I spun the rear wheel and
noticed a fairly significant amount of drag on it (yes it was in
neutral!... I double checked!). Is this normal?? (hard to define
"slight amount" without a way to really measure it... but if I give it a
good spin it only makes two or three revs.)

Any feedback appreciated.

Thanks,
Barry Dikeman
73 Eldo

============================================================
Stretch your dollars.
Make George do double duty with amazing deals from
TopOffers.
http://click.topica.com/caaacgOb1dfltb2D1Vxf/TopOffers
============================================================

Entire thread: