Subject: Re: intake port diameter
Author: EldoMike
Date: Aug 20, 2002, 4:55 AM
Post ID: 1710841600
Your heads must be V700 style...there is an adapter that goes into the head
before the carb manifolds are bolted on...
Mike
www.classicguzzi.com
----- Original Message -----
From: "Michael Jones" <mjon-@yahoo.com>
To: <Loopfram-@topica.com>
Sent: Monday, August 19, 2002 9:59 PM
Subject: intake port diameter
| Hi, all, I've another question already. Putzing around with the Ambo I discovered that the exit of the intake manifold is 30mm, but the entrance on the intake port is 37 or 38mm. (The holes in the gaskets are 30mm.) Why is that? I expected the two inside diameters to match up. -Mike (69 Ambo) |