Subject: Re: petcock gasket

John boettcher made a punch set-up and made a bunch of them out of
Viton. Contact him at ratg-@hotmail.com or @yahoo.com. I have some
here somewhere nad may be able to find them if he has none left.

GF

On Wednesday, February 4, 2004, at 04:49 PM, Karl Kologiski wrote:

Has anyone found a source for the rubber gasket with the holes for the
sugar
cube petcocks ? Mine are leaking and with my carb set up, I can not
run the
adapters & and later petcocks. I would like to fix these before I by
new
ones.

Skip & Jane Kologiski
Bird at The Wheel Vintage Motorcycle Stuff
http://home.earthlink.net/~kkologiski/bird.html
Central Florida Reps for the MGNOC (Moto Guzzi National Owners Club).
----- Original Message -----
From: "Charlie Mullendore" <li-@loopframe.com>
To: <Loopfram-@topica.com>
Sent: Wednesday, February 04, 2004 7:14 PM
Subject: RE: Spots n Signals

Hi Scott,
Way more freezing crud than I can stand, wish it would all go away!
More
coming though. :-(

The item no. of the spots I was planning to use is AGG064689P - $22
ea.,
then you'll need to get the sealed beam unit for another $10. Probably
can get the sealed beam at a NAPA or similar cheaper. Andy Hill (?)
was
using some lights from the tractor supply store on "Kermit" if I
remember correctly. If you want black housings, they would work.

You can find Lucas replicas cheap - usually around $8 ea. Most will
have
long (85mm?) stems which may or may not work for you. MG Cycle has
them
(I think) along with the later Cal II style CEV signals in black or
chrome. Aprilias show up on eBay occasionally, usually for mucho $ if
nice. If you're not worried about total originality, Dennis Kirk has
reproduction signals for many Japanese bikes that would work also.

You're welcome to come up anytime, drop me an email when you return.
Cheers,

Charlie

scott grupe wrote:

Hi Charlie, get much freezing crud up your way??
Ill look at Whitney see what they have. Signals..I guess Lucas but
dont
really know. Any recommendations?

Maybe Ill take a drive up your way after the 14th come see what u
have.
Ill be busy Xing the small pond until the 14th.

thanks for the reply!

Subject: Re: petcock gasket

Author: Greg Field

Date: Feb 5, 2004, 10:44 AM

Post ID: 1715959103

Entire thread: