Subject: Re: engine and tranny install
Author: IndyDi-@aol.com
Date: Sep 11, 2004, 7:27 PM
Post ID: 1717513850
--part1_d.327d6ae6.2e750dfc_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
I used the "tape hand towels to the frame rails" method. Motor with cylinders
on, generator off, tranny off with clutch installed. Had a 10 year old
neighbor kid put the front motor mount through while I held and lined it up. Motor
will sit there on the towels and pivot up and down on the front bolt to easy
tranny install. My 2 cents, Brett in Indy (Dreamcycle)
--part1_d.327d6ae6.2e750dfc_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 8bit
<HTML><FONT FACE=arial,helvetica><HTML><FONT SIZE=2 PTSIZE=10 FAMILY="SANSSERIF" FACE="Arial" LANG="0">I used the "tape hand towels to the frame rails" method. Motor with cylinders on, generator off, tranny off with clutch installed. Had a 10 year old neighbor kid put the front motor mount through while I held and lined it up. Motor will sit there on the towels and pivot up and down on the front bolt to easy tranny install. My 2 cents, Brett in Indy (Dreamcycle)</FONT></HTML>
--part1_d.327d6ae6.2e750dfc_boundary--