Subject: Re: Broken Bolt Blues
Author: STEVE FARRIS
Date: Dec 27, 2004, 9:12 AM
Post ID: 1718116411
This is a multi-part message in MIME format.
------=_NextPart_000_0010_01C4EBFC.96F1A000
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
Only thing I would add to all the other suggestions is after good soaking w/pb give it a little heat and repeat before starting the drilling.
Steve
----- Original Message -----
From: Christopher Mitchell
To: Loopfram-@topica.com
Sent: Monday, December 27, 2004 8:30 AM
Subject: RE: Broken Bolt Blues
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free Thanksgiving recipes for you
http://click.topica.com/caacZpwb1dfltbN3z84b/PermissionData
-------------------------------------------------------------------
Love the PB Blast Cam, you can even buy it in the drug store here in the northeast like Genovese and Eckereds. Another bolt removing trick is to cut a notch in the remaining stud with the cutoff wheel of a dremel tool (or a hacksaw I suppose) and turn it out with a big screwdriver. Sears also makes a set of drill bits to this sort of thing. Good luck.
From: Ray Hale <ray.-@sfcc.edu>
Reply-To: Loopfram-@topica.com
To: Loopfram-@topica.com
Subject: RE: Broken Bolt Blues
Date: Mon, 27 Dec 2004 12:50:49 +0000
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacVmib1dfltb3cMLEa/MyDietPatches
-------------------------------------------------------------------
Wholeheartedly agree. PB Blaster is the best for the hard to reach
places. If you can get past the fact it is made in Cleveland, along with
most of the other toxic stuff we like best, it is truly remarkable. You
can spray it at any odd angle and watch it seep into the space where you
thought there was no space. If it's a straight through hole with a bolt
in it, you can actually watch the stuff come dribbling out the other
side. It gets in there where nothing else seems to. It works and it's
entertaining, too...well, if you're easily amused.
Thanks to all for the carb answers.
Ray
Greg Barratt wrote:
>
> left handed drill bit is the only way to go. usually about half way
> through the bolt it'll just spin out....a little bit of pb works wonders
>
> too..
>
pax sine tedio
73 Eldo "19"
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
Show your support for finding cures for both AIDS & Cancer.
Get yours for just $1.99. This bracelet makes a difference.
http://click.topica.com/caacVlOb1dfltb3cMLEf/PennMedia
-------------------------------------------------------------------
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
http://click.topica.com/caacVmib1dfltbN3z84g/MyDietPatches
-------------------------------------------------------------------
------=_NextPart_000_0010_01C4EBFC.96F1A000
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content=text/html;charset=iso-8859-1>
<STYLE></STYLE>
<META content="MSHTML 6.00.2900.2523" name=GENERATOR></HEAD>
<BODY id=MailContainerBody
style="PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: normal; FONT-FAMILY: Verdana; BORDER-RIGHT-STYLE: none; BORDER-LEFT-STYLE: none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: none"
leftMargin=0 topMargin=0 acc_role="text" CanvasTabStop="true"
name="Compose message area"><?xml:namespace prefix="v" /><?xml:namespace prefix="o" />
<DIV>
<DIV>Only thing I would add to all the other suggestions is after good soaking
w/pb give it a little heat and repeat before starting the drilling.</DIV>
<DIV>Steve</DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style="FONT: 10pt arial"><B>From:</B> <A
href="mailto:derby-@hotmail.com">Christopher Mitchell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, December 27, 2004 8:30
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> RE: Broken Bolt Blues</DIV>
<DIV><BR></DIV><PRE>Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Free Thanksgiving recipes for you
<A href="http://click.topica.com/caacZpwb1dfltbN3z84b/PermissionData">http://click.topica.com/caacZpwb1dfltbN3z84b/PermissionData</A>
-------------------------------------------------------------------
</PRE>
<DIV>
<DIV class=RTE>
<P>Love the PB Blast Cam, you can even buy it in the drug store here in
the northeast like Genovese and Eckereds. Another bolt removing trick is to
cut a notch in the remaining stud with the cutoff wheel of a dremel tool (or a
hacksaw I suppose) and turn it out with a big screwdriver. Sears also makes a
set of drill bits to this sort of thing. Good luck. </P>
<P><BR> </P></DIV>
<DIV></DIV>From: Ray Hale <ray.-@sfcc.edu>
<DIV></DIV>Reply-To: Loopfram-@topica.com
<DIV></DIV>To: Loopfram-@topica.com
<DIV></DIV>Subject: RE: Broken Bolt Blues
<DIV></DIV>Date: Mon, 27 Dec 2004 12:50:49 +0000
<DIV></DIV>
<DIV></DIV>Your free subscription is supported by today's sponsor:
<DIV></DIV>-------------------------------------------------------------------
<DIV></DIV>Amazing Diet Patch
<DIV></DIV>The fastest - Easiest way to lose weight! Try it now FREE!
<DIV></DIV>http://click.topica.com/caacVmib1dfltb3cMLEa/MyDietPatches
<DIV></DIV>-------------------------------------------------------------------
<DIV></DIV>
<DIV></DIV>Wholeheartedly agree. PB Blaster is the best for the hard to reach
<DIV></DIV>places. If you can get past the fact it is made in Cleveland, along
with
<DIV></DIV>most of the other toxic stuff we like best, it is truly remarkable.
You
<DIV></DIV>can spray it at any odd angle and watch it seep into the space
where you
<DIV></DIV>thought there was no space. If it's a straight through hole with a
bolt
<DIV></DIV>in it, you can actually watch the stuff come dribbling out the
other
<DIV></DIV>side. It gets in there where nothing else seems to. It works and
it's
<DIV></DIV>entertaining, too...well, if you're easily amused.
<DIV></DIV>Thanks to all for the carb answers.
<DIV></DIV>Ray
<DIV></DIV>
<DIV></DIV>Greg Barratt wrote:
<DIV></DIV>>
<DIV></DIV>> left handed drill bit is the only way to
go. usually about half way
<DIV></DIV>> through the bolt it'll just spin out....a little bit of pb
works wonders
<DIV></DIV>>
<DIV></DIV>> too..
<DIV></DIV>>
<DIV></DIV>
<DIV></DIV>
<DIV></DIV>
<DIV></DIV>pax sine tedio
<DIV></DIV>73 Eldo "19"
<DIV></DIV>
<DIV></DIV>Your free subscription is supported by today's sponsor:
<DIV></DIV>-------------------------------------------------------------------
<DIV></DIV>** Get Your Own Support-a-Cure Yellow Bracelet for $1.99 **
<DIV></DIV>Show your support for finding cures for both AIDS & Cancer.
<DIV></DIV>Get yours for just $1.99. This bracelet makes a difference.
<DIV></DIV>http://click.topica.com/caacVlOb1dfltb3cMLEf/PennMedia
<DIV></DIV>-------------------------------------------------------------------
<DIV></DIV>
<DIV></DIV>
<DIV></DIV></DIV><PRE>Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Amazing Diet Patch
The fastest - Easiest way to lose weight! Try it now FREE!
<A href="http://click.topica.com/caacVmib1dfltbN3z84g/MyDietPatches">http://click.topica.com/caacVmib1dfltbN3z84g/MyDietPatches</A>
-------------------------------------------------------------------
</PRE></BLOCKQUOTE></DIV></BODY></HTML>
------=_NextPart_000_0010_01C4EBFC.96F1A000--