Topica Loopframe_Guzzi Archive


Subject: RE: wiring ideas????

Author: Robert Hawkes

Date: Feb 21, 2005, 3:13 AM

Post ID: 1718426863



Andy, I have this whole week off. Want me to come over with my spanner
wrenches and get those bad boys off there for you? Heat up those threads
and then squirt Blaster or Marvel oil on them and the heating and cooling
can move the oil through the threads some. Call me if you like and I'll
come down. The only other thing I have planned this week is to wire up a
new light on the side of the house. Already half done. Bob

-----Original Message-----
From: andy hill [mailto:alh-@adelphia.net]
Sent: Sunday, February 20, 2005 4:23 PM
To: Loopfram-@topica.com
Subject: wiring ideas????

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Your opinion counts! We're giving away ten $100 cash prizes!
A major food company wants to know what you think about a product
& package design. Hurry, only ten $100 prizes left!
http://click.topica.com/caadbR9b1dfltb7ukc8a/ValRad Survey
-------------------------------------------------------------------

howdy, folks-
still have no spark. according to the multi-meter, there is only 6
volts going to the starter [the small wire] and i am seeing nothing at
all at the generator [marelli- the red wire goes to the back of it,
right?] the only thing hot at the regulator is the red wire [12volts].
field and the red/brown is dead. any ideas? as an aside- i have yet
ANOTHER V-700 motor in the shop, and the exhaust nuts are stuck, big
time. destroyed one of 'em already. used heat, punch, chisel, BFH, all
to no avail. sheesh.... feel like an fng. spring is a coming- need to
get these old mutha's done- appreciate any ideas!
an-d

Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free!
http://click.topica.com/caadazob1dfltb7ukc8f/ProductTestPanel
-------------------------------------------------------------------

Entire thread: