Subject: Re: Getting ready
Author: STEVE FARRIS
Date: May 26, 2005, 5:09 AM
Post ID: 1718928160
paul,
put a dab of paint, grease, etc. on tire, set on bike so tire is loaded roll forward til the paint makes two marks on the floor, measure distance between. Usually gets really accurate measurement.
Steve
----- Original Message -----
From: Custom Guzzi
To: Loopfram-@topica.com
Sent: Wednesday, May 25, 2005 2:35 PM
Subject: RE: Getting ready
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Get a Free T-Mobile Sidekick II plus $500 towards service!
Click here.
http://click.topica.com/caaduFNb1dfltbN3z84a/ProductTestPanel
-------------------------------------------------------------------
Dave,
When you calibrated the unit for your wheel, what info did you enter. Mine
(Schwinn model) asks for the wheel diameter which you have to convert to
millimeters and then multiply by 3.1416 to get the actual number that's set
into the unit. Now do you include the tire in this or not?
Paul
-----Original Message-----
From: David Washburn [mailto:guzzi-@yahoo.com]
Sent: Sunday, May 22, 2005 7:06 PM
To: Loopfram-@topica.com
Subject: Getting ready
added the Topeak bicycle speedo that has lain in a box since Christmas.
DW
Your free subscription is supported by today's sponsor:
-------------------------------------------------------------------
Need a new washer and dryer set? You could get one free!
http://click.topica.com/caadtaGb1dfltbN3z84f/ProductTestPanel
-------------------------------------------------------------------