Main harness for the California III (Double contact breaker [DR], Magura handlebar switches [M])

Main harness for the California III (Double contact breaker [DR], Magura handlebar switches [M])

The California III came equipped with variations in the charging system:

• Saprisa charging system. Voltage regulator was mounted behind the right side cover.
• Ducati charging system. Voltage regulator was mounted in front of the engine, above the alternator.

The California III came equipped with variations in the ignition system:

• Standard distributor with coils located behind the left side cover.
• Digiplex electronic ignition with coils under the fuel tank.

Please let me know which variation you may have.

WANTED: I very much want to reproduce this harness for the California III. Should you have this California III harness suitable for duplication, I would like to speak with you. For more information, email: greg@thisoldtractor.com

Originally, Moto Guzzi routed the wires to the ignition switch through the Molex connector. I've found this to be troublesome. I prefer to route the wires directly to the ignition switch without going through the dash harness or any connector. Please let me know if you would like this modification.