Dash (2A - Series 2)

Part number: 29747251

USD $100.00

Dash (2A - Series 2)

Connects the main harness to the dash. I have been unable to source a replacement for the plug that connects to the 4-way flasher button. You will need to re-use your existing plug.

Originally, Moto Guzzi routed the wires to the ignition switch through the Molex connector. I've found this to be troublesome. I prefer to route the wires directly to the ignition switch without going through the dash harness or any connector. Please let me know if you would like this modification.

The series 2 dash uses this 4-way flasher button (MG# 28745761). Carefully note the connections on the bottom. (switch not included)
Photo courtesy of HMB-Moto.
Direct link to image

Applicable to this dash (not included)
Direct link to image

2 terminal connection for the front brake light switch.
Direct link to image

15 terminal connection to the main harness.
Direct link to image

6 terminal connection to the hazard light switch mounted on the dash.
Direct link to image

4 terminal connection to the headlight sub-harness.
Direct link to image

29747251: Main harness to dash (2A - Series 2).
Direct link to image