Transmission bearing cross-references - I-Convert

Moto Guzzi V7 Sport, 750 S, 750 S3, 850 T, 850 T3, 850 T3 California, V1000 I-Convert, V1000 G5, 1000 SP, Le Mans, Le Mans II, Le Mans CX 100, Le Mans III, Le Mans 1000, 1000 SP III, 1000 S, California II, California III, California 1100, California Jackal, California EV, California EV Touring, California Aluminium, California Titanium, California Special, California Special Sport, California Stone-Metal, California Stone-Touring, California Classic, California Touring, and California Vintage models

Created: 
Updated: 

Throw out bearing

The physical dimensions of the throw out bearing (MG# 92204217) is as follows:

  • Inside diameter: 17 mm
  • Outside diameter: 40 mm
  • Width: 12 mm

Here are various cross-references:

  • FAF 203PP
  • FAG 6203.2RSR
  • FED 1203RR
  • MRC 203-SZZ
  • ND Z99503
  • NH 203KK
  • RIV ALN 17
  • SKF 6203-2RS1
  • STEYR 6203.2RS

Clutch assembly bearing

The physical dimensions of the bearing used in the clutch assembly (MG# 92201220) is as follows:

  • Inside diameter: 20 mm
  • Outside diameter: 47 mm
  • Width: 14 mm

Here are various cross-references:

  • FAF 204K
  • FAG 6204
  • FED 1204
  • MRC 204-S
  • ND 3204
  • NH 204
  • RIV 1A 20
  • SKF 6204
  • STEYR 6204

Input shaft (clutch shaft) bearing - front

The physical dimensions of the front bearing on the input shaft (clutch shaft) (MG# 92218421) is as follows:

  • Inside diameter: 20 mm
  • Outside diameter: 47 mm
  • Width: 20.6 mm

Here are various cross-references:

  • FAG 3204
  • FED 5204
  • RIV 2 AANOn20
  • SKF 3204
  • STEYR 3204

Input shaft (clutch shaft) bearing - rear

The physical dimensions of the rear bearing on the input shaft (clutch shaft) (MG# 92256218) is as follows:

  • Inside diameter: 17 mm
  • Outside diameter: 35 mm
  • Width: 15 mm

Here are various cross-references:

  • Durkopp 10-2762
  • RIV NAS 17
  • Torrington 10-2762
  • Timken 10-2762

This bearing can be difficult to source from non-Guzzi source. MG Cycle carries this bearing.

Main shaft bearing - front

The physical dimensions of the front bearing on the main shaft (MG# 92201420) is as follows:

  • Inside diameter: 20 mm
  • Outside diameter: 52 mm
  • Width: 15 mm

Here are various cross-references:

  • FAF 304K
  • FAG 6304
  • FED 1304
  • MRC 304-S
  • ND 3304
  • NH 304
  • RIV 5B
  • SKF 6304
  • STEYR 6304

Main shaft bearing - rear

The physical dimensions of the rear bearing on the main shaft (MG# 92256218) is as follows:

  • Inside diameter: 17 mm
  • Outside diameter: 35 mm
  • Width: 15 mm

Here are various cross-references:

  • Durkopp 10-2762
  • RIV NAS 17
  • Torrington 10-2762
  • Timken 10-2762

This bearing can be difficult to source from non-Guzzi source. MG Cycle carries this bearing.

Output shaft (layshaft) bearing - front

The physical dimensions of the front bearing on the output shaft (layshaft) (MG# 92201420) is as follows:

  • Inside diameter: 20 mm
  • Outside diameter: 52 mm
  • Width: 15 mm

Here are various cross-references:

  • FAF 304K
  • FAG 6304
  • FED 1304
  • MRC 304-S
  • ND 3304
  • NH 304
  • RIV 5B
  • SKF 6304
  • STEYR 6304

Output shaft (layshaft) bearing - rear

The physical dimensions of the rear bearing on the output shaft (layshaft) (MG# 92201425) is as follows:

  • Inside diameter: 25 mm
  • Outside diameter: 62 mm
  • Width: 17 mm

Here are various cross-references:

  • FAF 305K
  • FAG 6305
  • FED 1305
  • MRC 305-S
  • ND 3305
  • NH 305
  • RIV 6B
  • SKF 6305
  • STEYR 6305