Subject: Re: Coil didnt fail
Author: Martin Cooke
Date: Jun 17, 2000, 11:59 AM
Post ID: 1701053645
Dave's totally right here. These gaskets compress very quickly, and when
they do the valve clearances close right up. Do check.
----- Original Message -----
From: Dave Otis <lo-@dotis.com>
To: <Loopfram-@topica.com>
Sent: Saturday, June 17, 2000 7:52 PM
Subject: Re: Coil didnt fail
--- Support our Sponsor ------------------------------------do
Get faster web speed! Install NetSonic, the #1 Web Accelerator
for FREE! PCWorld's "Best Freeware 1999" allows you to access
sites quicker and improves your web experience.
http://click.topica.com/aaaapob1dfltb1mQnga/NetSonic
------------------------------------------------------------
Scott, if you haven't torqued the heads a few times since you started up
it! I do it once after the first run around the block, once after thefirst
50 miles, again 500 miles later, you will see, that each time the torqueis
way off, the gaskets compress severely, must be done religously.dies
Hello loopers,
I replaced the coil in my 69 Ambo, and the bikes runs great but still
carbs.when hot. Seems to be only when its idling. Now I am suspecting the
Maybe the heads need to be retorqued?
Scott
David J. Otis
Middletown MD
http://www.loopframe.com
________________________________________________________________________
Start an Email List For Free at Topica.http://www.topica.com/register