| ============================================================ Sign up for My Topica and get a FREE, personalized web page for all your subscriptions, online reading and posting privileges, special offers, and more! http://click.topica.com/caaabHSb1dfltb2uzY8a/register ============================================================
Modifying the shift linkage in this way seems a good idea to me on bikes with the factory footboards as it moves the operating lever much closer to the support bushing, as well as making the shit pattern the now universal one down, four/three up. Don't know about footpeg models.
I did this on my Cali some years ago & it works fine. I probably have a drawing of the modified shaft somewhere too, if anyone wants to see it.
cookie
----- Original Message ----- From: Tom Bowes <kk-@home.com> To: <Loopfram-@topica.com> Sent: Sunday, July 08, 2001 2:09 AM Subject: RE: Shift Linkage and pattern
| ============================================================ At eVineyard find over 5,000 premium wines; accessories, gifts, case discounts, live customer care, wine reviews, wine clubs, and more! http://click.topica.com/caaacBjb1dfltb2DS92a/evineyard ============================================================
Paul,
Actually, you would have to modify the shaft which the shift lever is connected to. It is easy enough to flip the actuator arm on the back of the trans around the other way, but then the corresponding lever on the pivot shaft will be off by about 5 inches. The only way that I can think of getting it to work would be to move the position of the arm (which is welded to the shaft) about 5 inches to the left in order to get it to line up with the new location of the actuator. This means that you would either have to grind off the weld on the existing arm and move it over, or better yet, fabricate a new arm and weld it in the new position.
Here is a link to a photo of the shift linkage on my Ambo, which is set up with the footboards and consequently the "reverse" shift pattern.
http://members.home.net/kk8m/guzzi/images/ShiftLinkage Ambo Police.jpg
Tom
'70 (July '69) Ambassador 96% Complete, 27% Left To Go '82 V50-III Shelby Township, Michigan
Paul Linn wrote:
| Does anyone have a good clear picture of how the linkage should be setup on an Ambo and Eldo. Placing the arm on the rear of the transmission differently can also change your shift pattern, correct? Facing right, standard shift pattern for Guzzi (1st Up, all others down). Facing left, reverse shift pattern (1st down, all others up). If I wanted to change the arm to the left, I would then have to modify my linkage to be able to reach the shift shaft, correct?.
Paul 69 Ambo .5 74 Eldo Greensboro, NC
_________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address athttp://mail.yahoo.com |
============================================================ Crazy for bargains? Go nuts with TopOffers where total bargain madness is normal! http://click.topica.com/caaacgEb1dfltb2DS92f/TopOffers ============================================================ |
|