Subject: Re: Transmission Pressure Relief Valve
Author: Patrick Hayes
Date: Aug 4, 2001, 12:23 AM
Post ID: 1707751291
In a message dated 08/03/2001 9:16:06 PM Pacific Daylight Time,
derekh-@home.com writes:
<< Is there any fix here, replace it or...............? >>
Years ago I had an Eldo. It leaked badly out the hole in the shift detent
plug on the left side. I drille the hole slightly larger to 1/8" and
inserted a small tube and soldered in place. Then attached a fish tank air
hose and ran it up into the battery compartment in an inverted U. You could
see oil in the tubing, but it never went more than a couple inches high.
Patrick