Subject: Re: phf 36 float settings/jetting? LeMans I for sale - no Loop content
Author: Martin Cooke
Date: Mar 20, 2002, 1:20 AM
Post ID: 1709887665
your list:
Needle - K5, 2nd (middle) groove
Slide - 60/3
Main jet - 140 (stock 135)
Pilot jet - 50 (stock 60)
Starter jet - 70
Atomiser - AB265
looks same as what i've got here in my LM & is stock for euro LM.
my own bike has gas flowed heads, RITA ignition & K & N's & runs fine on
this set up*. i use stock pilot jet (60).
*does run marginally better when using stock bell mouth intakes on carbs,
but generally K & N's are fitted for protection.
cookie
----- Original Message -----
From: "Charlie Mullendore" <C.D.Mul-@worldnet.att.net>
To: <Loopfram-@topica.com>
Sent: Tuesday, March 19, 2002 11:32 PM
Subject: Re: phf 36 float settings/jetting? LeMans I for sale - no Loop
content
time.Hi all,
Fred's question and the great responses couldn't have come at a better
I'm working on a customer's LeMans I carbs and boy are the float levelsway
off! That will definitely help with it's running problems, but I'd likesome
input on the jetting as well. Here's a comparison of what I have listed asstraightened,
stock and what is currently in the carbs:
Needle - K5, 2nd (middle) groove
Slide - 60/3
Main jet - 140 (stock 135)
Pilot jet - 50 (stock 60)
Starter jet - 70
Atomiser - AB265
The heads have been ported and polished, the manifolds cut and
K&N filters, a custom built exhaust with MAC mufflers and a Dyna ignitionpilot
firing car coils are installed. Seems to me with the mods it has, the
jets could have stayed stock without being too rich. Ideas?is
While I'm already off topic, let me add that the above mentioned LeMans I
for sale. It's sporting a monoshock rear suspension, modified front forksand
(supposedly with Marzocchi damping rods inside), custom-made fork brace
has been somewhat lightened (parts deemed unnecessary by the builder were
removed). Needs some TLC, owner is asking $3000. If anyone is interested,
I'll pass his number along to you. Thanks!
Charlie
Fred Sahms wrote:Anyone know the correct float levels for the PHF 36 pumpers off a LeMans
1? The haynes book vaguely suggests 23.5mm, and Godfrey's website says
17-18mm.
============================================================
The creator of this web-based guide earns six figures a
year from his basement. Come read this unique guide for
free right now, and discover exactly how you can make YOUR
living online. (It's easier than you might think.)
http://click.topica.com/caaahVxb1dfltb2DS92f/make-a-living-online
============================================================