Subject: Re: couple o questions

Author: Martin Cooke

Date: Jun 5, 2002, 10:40 AM

Post ID: 1710379866

Also, can you have an oil leak from the head gasket? I
replaced my o-rings on the top of my right head but it
still leaks a tiny bit between the head and cylinder.

There's a plug that covers the nut (you need an allen wrench for the nut
) for the short stud on the pushrod side of the head. Chances are that
this is where your leak starts; a new aluminum washer under it, some
teflon tape, or your favorite hi temp sealer will work.

John Prusnek