Subject: Re: Elvira has a problem
Author: EldoMike
Date: Oct 14, 2002, 7:15 AM
Post ID: 1711202300
This is a multi-part message in MIME format.
------=_NextPart_000_00F6_01C27361.FED6B0E0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
Paul, you will need to keep the tranny mounts and redo the front engine mounts.
Mike
www.classicguzzi.com
----- Original Message -----
From: Paul Linn
To: Loopfram-@topica.com
Sent: Sunday, October 13, 2002 3:11 PM
Subject: Elvira has a problem
Ok motorheads, just ran into a snag on Elvira. I'm using the T3 motor, tranny etc in an Eldo frame and it seems that the T3 motor and tranny combined are about 1/4" longer than an Eldo motor and tranny (I guess due to the front cover). This being the case (no pun intended), the motor bolts up fine, but the tranny bolt holes are 1/4" past the frame mounts! I want to use the T3 alternator, that's why I never got the kit to mount on the crank for the pulley so I could use a generator etc... Anyone have any suggestions other than grinding off the frame mounts and re-welding them in the right place. This would create another headache in getting all the linkages in the right places.
Paul
Richmond, Va
73 Eldo custom project "Elvira" coming together slowly, now at a screeching halt!!
76 T3 basket
------=_NextPart_000_00F6_01C27361.FED6B0E0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2716.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Paul, you will need to keep the tranny mounts and
redo the front engine mounts.</FONT></DIV>
<DIV> </DIV>
<DIV>Mike<BR><A
href="http://www.classicguzzi.com">www.classicguzzi.com</A><BR></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=p-@attbi.com href="mailto:paul-@attbi.com">Paul Linn</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Loopfram-@topica.com</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Sunday, October 13, 2002 3:11
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Elvira has a problem</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Ok motorheads, just ran into a snag on Elvira.
I'm using the T3 motor, tranny etc in an Eldo frame and it seems that the T3
motor and tranny combined are about 1/4" longer than an Eldo motor and tranny
(I guess due to the front cover). This being the case (no pun intended), the
motor bolts up fine, but the tranny bolt holes are 1/4" past the frame
mounts! I want to use the T3 alternator, that's why I never got the kit to
mount on the crank for the pulley so I could use a generator etc... Anyone
have any suggestions other than grinding off the frame mounts and re-welding
them in the right place. This would create another headache in getting all the
linkages in the right places.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Paul<BR>Richmond, Va<BR>73 Eldo custom project
"Elvira" coming together slowly, <STRONG>now at a screeching
halt!!</STRONG><BR>76 T3 basket</FONT></DIV></BLOCKQUOTE>
</BODY></HTML>
------=_NextPart_000_00F6_01C27361.FED6B0E0--