Subject: Re: More suspension stripping questions
Author: Ross
Date: Nov 5, 2002, 3:34 PM
Post ID: 1711338531
Preloading the springs may help. 3/4 inch to one inch of plastic sch.. 80
pipe (ABS I think). Or have a friend with a lathe turn something in metal.
Regards,
Ross
on 11/5/02 2:35 PM, David Szenasy at davids-@hotmail.com wrote:
I used the ideas from my first post, and succeded in getting my forks mostly
apart. I need to know how to continue stripping the forks...I have the
springs out, the headlight/fork covers off, but how from here. I think I
have seen mention of the chrome covers threaded on? If so, how? will I be
able to get replacement seals, etc.?
Also, are there any upgrades that will make these perform better than stock?
Mine seem to bottom relatively easily, and I have used several weights of
oil.
Thanks,
David Szenasy
_________________________________________________________________
Unlimited Internet access -- and 2 months free! Try MSN.
http://resourcecenter.msn.com/access/plans/2monthsfree.asp
--
K. Ross Raymond
Arizona USA
Goethe: "We become what we despise..."
'71 LAPD Ambassador
'69 Triumph T100S
Norton hopeful
1998 Ariel (my daughter, after the Sq.4, not the mermaid)