Subject: Re: Need to find a starter & solinoid for a 71 Ambo
Author: Paul Linn
Date: Mar 25, 2003, 12:55 PM
Post ID: 1712377444
Valeo starters work on Loops too. I had one on my Ambo and I believe Tom
Bowes has one on his also.
Paul
Midlothian, Va
73 Eldo "Elvira" coming together very slowly
74 Eldo another project
76 T3 basket
----- Original Message -----
From: "Fred Sahms" <fr-@fredsgarage.net>
To: <Loopfram-@topica.com>
Sent: Tuesday, March 25, 2003 2:11 PM
Subject: RE: Need to find a starter & solinoid for a 71 Ambo
But I believe those are for the tonti bikes. The loops use a differentshut
starter.
Paul Linn wrote:Try these folks for a Valeo starter which replaces the stock ones we
use.
http://www.guzzitech.com/DiscntValeo-Tom_L.html
Paul
Midlothian, Va
73 Eldo "Elvira" coming together very slowly
74 Eldo another project
76 T3 basket
----- Original Message -----
From: <bred-@aol.com>
To: <Loopfram-@topica.com>
Sent: Tuesday, March 25, 2003 11:08 AM
Subject: Need to find a starter & solinoid for a 71 AmboWell, after the starter smoked I took it off the bike and took a lookinside.It appears that the solinoid stuck and did not allow the starter to
down and caused major damage in side(at least thats my guess). Thebracketthat holds the brushes in place burned through and one of the brushesmeltedon to the armature. Not sure what to do but look for another starter.starter?
Anyone have any suggestions? New? Used? What replaces a Marelli
Bryan
73 Eldo (it runs)
78 T3/949