Subject: Re: Drum brake cush drive
Author: Paul Linn
Date: Apr 13, 2003, 5:04 PM
Post ID: 1712611819
Jesse,
Let me know when you do the bracket as I will be needing another one for the
73 if I use the disc brake swingarm and bracket on my 74. Would this bracket
you are envisioning enable you to use the drum brake swing arm? I have a
lead on a T rear wheel but it doesn't have the brake plate with it. I
already have 2 disc brake front and rear wheels so could do both my bikes.
Paul
Midlothian, Va
73 Eldo "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project
76 T3 basket of stuff
----- Original Message -----
From: "Jesse Open" <beaver-@comcast.net>
To: <Loopfram-@topica.com>
Sent: Sunday, April 13, 2003 7:00 PM
Subject: RE: Drum brake cush drive
BTW let me know if you have a hard time fiding a rear disc. I wasfit
thinking about making up a fixture to weld the disc bracket to looper
swing arms.
Greg Field wrote:Jesse:
I agree about the splines and stuff (mine are still fine 50,000 miles
fter adding the cush drive as when I put it on), but in Seattle that
brake starts to get funky in just a few weeks. The pivots gets stiff,
and then they're the classic off or locked (especially on wet roads)
2LS rear brake.
I ride almost daily in the wet from Oct. to May, so I'm not really
happy with them. Guess I'll have to put on a rear disc.
GF
On Sunday, April 13, 2003, at 07:38 AM, Jesse Open wrote:If the T brakes are set up right they work OK . The savings on clutch
,trans,rear drive ,drive splines, universal joint and even the carrier
bearing make it a real good swap in my book.
Greg Field wrote:
--Apple-Mail-4-948014075
Content-Transfer-Encoding: 8bit
Content-Type: text/plain;
charset=ISO-8859-1;
format=flowed
No. Drums are half-width on the T.
Cush drives are great. T brakes suck big time. Tough call on whether
it's worth it.
GF
On Friday, April 11, 2003, at 04:32 PM, Paul Linn wrote:Ok folks here's a question. Will the brake plate from a Loop drum
a 850T cush drive drum?
?
Paul
Midlothian, Va
73 Eldo? "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project
76 T3 basket of stuff
--Apple-Mail-4-948014075
Content-Transfer-Encoding: quoted-printable
Content-Type: text/enriched;
charset=ISO-8859-1
No. Drums are half-width on the T.
Cush drives are great. T brakes suck big time. Tough call on whether
it's worth it.
GF
On Friday, April 11, 2003, at 04:32 PM, Paul Linn wrote:
<excerpt><fontfamily><param>Arial</param><smaller>Ok folks here's a
question. Will the brake plate from a Loop drum fit a 850T cush drive
drum?</smaller></fontfamily>
=A0
<fontfamily><param>Arial</param><smaller>Paul
Midlothian, Va
73 Eldo=A0 "Elvira" at a halt in favor of "Daisy"
74 Eldo "Daisy" new project
76 T3 basket of stuff</smaller></fontfamily>
=
</excerpt>=
--Apple-Mail-4-948014075--