Subject: Re: Photos of restoration
Author: brucedaniels
Date: Jan 22, 2004, 1:22 PM
Post ID: 1715828454
John - all these parts have a great shine. Do you ever use a Clearcoat?
I was looking at a product called "Glisten PC" from RestoMotive and
wondered if you, or anyone, had used this or a similar product before.
They also have a Metal Polish called "Artisan Metal Polish".
Or is it best to just use "Elbow Grease"?
There URL:
http://www.por15.com
Bruce
North Carolina
1970 LAPD Ambassador
Ian Adkins wrote:
Thanks! I used a handful of different types of Felt Bob branded Dremel style buffs. If you spin'em too fast the tips pop off in seconds. Usually I'd get about 1 minute of polishing before they gave out!!! At $2.00 a shot vs $3.99+ for Dremel OEM. Dremel does have one that I had a hard time finding that worked great on the edge detail of valve covers etc. A 2" buff on a flex cord chucked in a drill press gave me some closeup polishing I could not get with the 6" machine buffs. Later, JU |