Subject: RE: rear end gearset
Author: Custom Guzzi
Date: Feb 20, 2004, 4:07 AM
Post ID: 1716097694
Here you go John.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=35623&item=2461844883
Paul
Midlothian, Va
MGNOC#19926
73 Eldo "Elvira" next project
74 Eldo "Daisy" LAPD, CHP, ATLPD and every other PD that used them.
Prusnek wrote:
John:
I'm confused; we're not looking for quick, we're looking to lower the
final engine rpms, since we've got plenty of low end grunt with the V8
engine pushing it.
Are the Eldo ratios below available as different sets?
John PrusnekI've put a 7/33 in an Ambo housing. Until you snug up the bolts you
swear it will rub on the sides because it is a larger diameter then the
older 8/35.
Ambo 8/35 = 4.375 ratio
Eldo 8/37 = 4.625
7/33 = 4.714
8/33 = 4.125
The 7/33 "should" feel quicker.
Later,
JU