Subject: Re: swingarm bearings
Author: Paul Linn
Date: Mar 17, 2003, 6:07 AM
Post ID: 1712273306
This is a multi-part message in MIME format.
--Boundary_(ID_AMOBrzA+7cMvPKFAQ1Rq3A)
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Matt,
The seals should be flush once you have everything together.
Paul
Midlothian, Va
73 Eldo "Elvira" coming together very slowly
76 T3 basket
----- Original Message -----
From: Matt Moore
To: Guzzi Looplist
Sent: Monday, March 17, 2003 7:58 AM
Subject: swingarm bearings
anybody know how deep the races for the swingarm bearing have to be seated into the swingarm? I know there has to be a little room back there for the removal tool to be able to get them out, and if they are set too deep it might use up too much of the adjustment on the pivots. Should it be just deep enough to seat the seals flush?
Thanks
matt in MI
--Boundary_(ID_AMOBrzA+7cMvPKFAQ1Rq3A)
Content-type: text/html; charset=iso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2716.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Matt,</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>The seals should be flush once you have everything
together.</FONT></DIV>
<DIV> </DIV>
<DIV>Paul<BR>Midlothian, Va<BR>73 Eldo "Elvira" coming together very
slowly<BR>76 T3 basket </DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=m-@hotmail.com href="mailto:moor-@hotmail.com">Matt
Moore</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=Loopf-@topica.com
href="mailto:Loopfram-@topica.com">Guzzi Looplist</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, March 17, 2003 7:58
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> swingarm bearings</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>anybody know how deep the races for the swingarm
bearing have to be seated into the swingarm? I know there has to be a little
room back there for the removal tool to be able to get them out, and if they
are set too deep it might use up too much of the adjustment on the pivots.
Should it be just deep enough to seat the seals flush?</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<DIV><FONT face=Arial size=2>matt in MI</FONT></DIV></BLOCKQUOTE>
</BODY></HTML>
--Boundary_(ID_AMOBrzA+7cMvPKFAQ1Rq3A)--