Subject: RE: '74 Eldo questions
Author: Charlie Mullendore
Date: May 5, 2005, 3:31 PM
Post ID: 1718818946
Hi Ted,
Try scuffing the surface of the shoes and drum with some sandpaper (120
grit or so)- just enough to break the glaze. Also, dab a little grease
on the actuating cam where it contacts each shoe. Hope this helps.
Cheers,
Ted Ward wrote:
My rear brake was making horrible noises, I took it apart and sprayed
brake
cleaner over all the appropriate surfaces and used a dremel to grind off
the
ridge on the edge where the brake shoe wasn't making contact with the
drum,
put it back together and it was great for a few miles then started doing
it
again. It not only sounds terrible, but I can feel it vibrating through
my
foot. Do I just need new pads or what?
Charlie
http://www.loopframeguzzi.com/