Subject: RE: Alarms
Author: thomas short
Date: Apr 19, 2002, 12:11 PM
Post ID: 1710099363
Zerhackermann wrote:
Easily done. get a noisemaker (horn, siren, etc.) from a junk shop/junk yard/home depot/auto parts shop. wire it up to make noise. then make an easy trip switch. |
It's easer than that.
Get your bell(120v) and wire it to the load side of the motion detector.
If somebody mmoves inside, the bell rings for as long as the timer on
the motion detector is set for. All you need to have is a remote
location to turn on/off the juice to the detector when entering/leaving
the home/garage.
A motion detector with two flood lights is what you want. Just wire in
the bell instead of the second light...or all three together. whatever
floats your boat...
Tom Short
AZ MGNOC Rep
Phoenix, AZ