Subject: RE: fork top linking plate question
Author: David Washburn
Date: Sep 18, 2003, 1:53 PM
Post ID: 1714572607
I did mine with a punch and a light ball peen hammer. Blue locktight on
the threads and then tap, tap, tap until it stopped moving. I marked
both lockrings and the plate with dot of white paint so I could see if
they were loosening up. 5K so far and no movement.
David in NYC
gr-@tonedeaftouring.com wrote:
i have some play in my front end, and figured i'd tighten the lockrings.. is there a way to do this without removing top linking plate? or am i approaching this all wrong? i can't get either steering tube lockring or lock cap to move with a spanner from the side... |