2018 June 23: Test fit all painted parts (4.50 hours)
Updated:
- Test fit all painted parts
- Drilled a larger hole in the rear fender for the wires to go through. The new hole is the same size as the smaller hole in the headlight bucket and accepts the same grommet.
- Elongated the two hole in the rear fender the secure the rear fender to the rear-most part of the frame. I made sure not to elongate too far and have open space shown when the the fender was mounted.
- Drilled mounting holes in both battery covers.
- Drilled the speedometer cable hole in the right battery cover.
- Identified all holes to be filled prior to paint.